The Ceramic Lined Rubber Hose is using in highly aggressive circumstance where the conventional unlined rubber hose requires frequent replacement. Also, ceramic lined rubber hose can be installed at some kind of vibration machinery or with some non-stationary equipment. It can increase the selection for engineers with widely approaches of installation and operation.Wear-resistant ceramic hose is a special pipe. With its excellent wear resistance, corrosion resistance and high temperature resistance, it has been widely used in many industrial fields. The following is a detailed introduction to wear-resistant ceramic hose:

Main features of wear-resistant ceramic hose

1-Good wear resistance: The inner lining ceramic layer of wear-resistant ceramic hose is wear-resistant ceramic, with a hardness (HRA) ≥ 88, and the wear resistance is more than 10 times that of high-chromium wear-resistant cast iron alloy pipe fittings, and the service life is long.

2-Corrosion resistance: Different wear-resistant ceramic materials are selected, which have excellent anti-corrosion properties for different corrosive media, and are resistant to strong corrosive media such as acid, alkali, salt and halogen salt corrosion.

3-Good high temperature resistance: Wear-resistant ceramic itself has the ability to withstand high temperatures above 1400 degrees Celsius. Through reasonable design and the use of different composite methods, wear-resistant ceramic hoses can be used in places where work continues uninterruptedly, and the service life will not be greatly reduced due to long-term work and continuous heat generation.

4-Good softness and easy to bend: The product is easy to bend, cost-effective, and can save the cost and time of maintenance and replacement of materials.The design of the cylindrical ceramic inside the rubber and the precise arrangement make the pipe with good flexibility, large angle bending will not have any effect on the ceramic;

5. Light weight

Weight is only 30% of steel pipes;

6. Convenient and quick installation

Provide with connections of fixed flange, active flange, screw, or quick connector.

7- Impact resistance

The impact on ceramics force moment by rubber buffer and absorption, so SHP-CR wear-resistant ceramic rubber hose for larger particles impact;

Manufacturing process of wear-resistant ceramic hose

The wear-resistant ceramic hose is manufactured by self-propagating high temperature synthesis (SHS) centrifugal method. The specific process is to put the steel pipe in the tube mold of the centrifuge, add iron red and the mixture of thermite, when the centrifuge tube mold rotates to a certain speed, a spark ignites the thermite, the thermite immediately burns itself, the combustion wave spreads rapidly, and the violent chemical reaction that occurs during the spread eventually forms special corundum ceramics.

Technical Specifications:

1.) Diameter Sizes from 1 inch up to 24 inch

2.) Lengths up to 20 meters

3.) Maximum operating pressure of 150 Psi

4.) Maximum operating temperature of 250˚F
 

• 

  Cable Cooling Hose

• 

  Wear-resistant ceramic rubber hose

• 

  Peristaltic Pump Hose