Drilling Hose   With Hammer Union

Bop Hose

Rotary drilling hose is consist of principally NBP constructed, featuring oil-resistant, abrasion resistant,acid and alkali resistant. It has 2-8 layers spiraled by single high-strength steel wire and rubber as a binder to make

the layers into one complete and sound construction.

It is covered by the primarily CR fabricated, featuring oil resistant, abrasion-resistant, weatherproof and anti-aging.

It is applied for oil fields, cementing, repairing, geological explorations, small drilling machine, and water conveyance at coal excavations. It is used to carry slurry, water at environmental temperature of -30°C to +82°C ,

and other fluids.

Construction

Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotary drilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids.

Tube:

Modified Nitrile, black, specially designed for handling abrasive, corrosive and oily drilling mud.

Reinforcement:

Multiple layers of textile fabric and steel cable with one layer middle rubber placed between cable layers.

Cover:

Modified Nitrile, black, specially designed Ultra abrasion cover is resistant to abrasion, corrosion, cutting, gouging, oil and weather.

Couplings:

Swaged couplings, full range of couplings are available, such as hammer unions, flanges, camlock and male thread, etc.

Temperature Range:

-40 °F to +212°F ( -40 °C to +100°C )

Applications

The vibrator hose is applied for oil drilling, the drilling mud in the delivery system between the top of riser with the vertical movement of the faucet may be connected to flexible hose and applied to the line between pump and the drilling riser for adjusting misalignment, to facilitate connection an vibration isolation. It is also applied to a large number of transport under high pressure from the pump rotary drilling equipment and a minimum aniline point of water-based or oil-based mud 66°C and can anticorrosive hydrogen sulfide, oilfield down hole conveying water, oil, mud high media.

• 

  Drilling Hose